WA_DEV_SL6087_PTS_002
Rev 001
Jun 17, 2010
21
AirPrime SL6087 User Guide
Certification Compliance and
Recommended Standards
The AirPrime SL6087 Intelligent Embedded Module has been granted modular approval for mobile
applications. Integrators may use this device in their final products without additional FCC / IC
(Industry Canada) certification if the following conditions are met. Otherwise, additional FCC / IC
approvals must be obtained.
1.
At least 20 cm separation distance between the antenna and the user’s body must be
maintained at all times.
2.
To comply with FCC / IC regulations limiting both maximum RF output power and human
exposure to RF radiation, the maximum antenna gain including cable loss in a mobile‐only
exposure condition must not exceed 8.0 dBi in the cellular band and 3.6 dBi in the PCS band.
3.
The AirPrime SL6087 Intelligent Embedded Module and its antenna must not be co‐located or
operating in conjunction with any other transmitter within a host device.
4.
A label must be affixed to the outside of the end product into which the AirPrime SL6087
Intelligent Embedded Module is incorporated, with a statement similar to the following:
This device contains FCC ID: N7NSL6087
This equipment contains device certified under IC: 2417C‐SL6087
5.
A user manual with the end product must clearly indicate the operating requirements and
conditions that must be observed to ensure compliance with current FCC / IC RF exposure
guidelines.
The end product with an AirPrime SL6087 Intelligent Embedded Module may also need to pass the
FCC Part 15 unintentional emission testing requirements and be properly authorized per FCC Part 15.
Note:
If this module is intended for use in a portable device, you are responsible for separate
approval to satisfy the SAR requirements of FCC Part 2.1093 and IC RSS‐102.
Please note that changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.