![Sierra Wireless AirPrime MC7710 Скачать руководство пользователя страница 25](http://html1.mh-extra.com/html/sierra-wireless/airprime-mc7710/airprime-mc7710_product-technical-specification-and-customer-design-manuallines_1266732025.webp)
Rev 6 Mar.13
Proprietary and Confidential - Contents subject to change
25
4
4: Electrical Specifications
The system block diagram in
represents the MC7710
module integrated into a host system. The module includes the
following interfaces to the host:
•
Power
— Supplied to the module by the host.
•
W_DISABLE_N
— Active low input from a hardware switch to the
MC7710 that disables the main RF radio.
•
GPS_EN_N
— Active low input from a hardware switch to the
MC7710 that disables the GPS radio.
•
WAKE_N
— Signal used to wake the host when specific events
occur.
•
WLAN_LED_N
drive signal provides an
indication of RADIO ON state, either WAN or GPS.
•
Antenna
— Three U.FL
connectors (two for Rx / Tx, and one for
GPS). For details, see
Note that GPS can use either the dedicated GPS port, or the
diversity/
port. GLONASS is supported only on the
dedicated GPS port.
•
SIM
— Supported through the interface connector. The
cavity / connector must be placed on the host device for this
feature.
•
USB
— Interface to the host for data, control, and status infor-
mation.
•
GPIO
— Four GPIOs reserved for future use.
The MC7710 has two main interface areas — the host I/O connector
and the
ports. Details of these interfaces are described in the
sections that follow.