
Page 22 of 53
3.3.4 THERMOSTAT, WALL SWITCH OR DIGITAL ON/OFF REMOTE INSTALLATION
The burner control knob is located in the control compartment at the bottom of the unit. For your convenience,
the unit can also be operated by a thermostat, a digital on/off remote or a wall switch control. Millivolt
thermostats are available from any authorized Inca Metal Cutting dealer. Bedroom installations require the use
of a wall thermostat.
Note:
Thermostats are not allowed in the United States.
Le bouton de commande du brûleur est situé dans le compartiment de commande au bas de l'appareil. Pour
votre commodité, l'appareil peut également être exploité par un thermostat, un appareil photo numérique on / off
à distance ou une commande de l'interrupteur mural. Thermostats millivolts sont disponibles depuis n'importe
quel revendeur agréé Inca Metal Cutting. Chambre installations nécessitent l'utilisation d'un thermostat mural.
Remarque:
Les thermostats ne sont pas autorisés aux Etats-Unis.
Thermostat, Digital On/Off Remote or Wall Switch Installation
Mount the thermostat, digital on/off remote or wall switch in the desired location and run
“two conductor
thermostat wire”
to the unit’s lower right hand corner, close to the gas s
upply line.
Monter le thermostat numérique, télécommande marche / arrêt ou l'interrupteur mural à l'endroit désiré et
exécuter "les deux fils du thermostat d'orchestre" au coin de l'appareil en bas à droite, près de la ligne
d'alimentation en gaz.
1. Purchase
“two conductor thermostat wire”
, which is not provided, at any local supplier. The gauge of
thermostat wire will determine the maximum wire length and distance at which to locate the thermostat,
digital on/off remote or wall switch. See Table 1 and the information packaged with thermostat. Be
aware that as the length of wire increases, the probability of adequate operating voltage decreases.
Achat "deux fils du thermostat d'orchestre», qui n'est pas fourni, à tout fournisseur local. La
jauge de fil de thermostat de déterminer la longueur de câble maximale et la distance à
laquelle de localiser le thermostat numérique, interrupteur marche / arrêt à distance ou au
mur. Voir le Tableau 1 et les informations fournies avec le thermostat. Soyez conscient que la
longueur du câble augmente, la probabilité de la tension de fonctionnement adéquat diminue.
TABLE 1
THERMOSTAT WIRE INFORMATION
WIRE SIZE
MAX. WIRE LENGTH
AWG
mm
ft.
m
22
0.6
10
3.0
20
0.8
25
7.6
18
1.0
40
12.2
16
1.3
64
19.5
14
1.6
100
30.5
NOTE
The thermostat, digital on/off remote or wall switch MUST be rated for millivolt use. Minimize
splicing in all millivolt wiring & crimp all unavoidable splices.
Le thermostat numérique, télécommande marche / arrêt ou l'interrupteur mural doit être évalué pour
une utilisation en millivolts. Minimiser épissage dans l'ensemble du câblage millivolt & sertir toutes
les épissures inévitable.
Содержание BL-936
Страница 48: ...Page 48 of 53 8 0 LABEL INFORMATION...
Страница 50: ...Page 50 of 53 APPENDIX A AMERICAN FLAME VALVE INFORMATION...
Страница 51: ...Page 51 of 53 APPENDIX A Continued...