6
7
2. To disconnect the Stainless steel brush (G) or other attachments (accessory kit optional)
press the release button (I) at the bottom back of the steamer body and carefully pull off
brush or accessories.
3. Unscrew the water tank cap (D) and fill water tank with water by using the refill cup (H), fill
refill cup to the 280ml/8.45 fl oz mark. Replace water tank cap (D) and tighten until snug
prior to use.
NOTE: To ensure only the highest quality products are produced, Sienna has pre-tested all
steamers. This is why you may see some water condensation on the inside of the water tank.
Note: Use only water! Do not use soap or solutions in steamer. The steamer does not require
distilled water. However it is recommended residents in areas with hard water should use
distilled water for better performance.
4. Plug power cord into wall outlet. The Power Indicator light (B) will illuminate solid red.
NOTE: It is recommended that another high wattage appliance is not operated on the same
circuit to avoid a circuit overload.
