Siemens WU P Series, Инструкция по эксплуатации и руководство по установке

Страница: 27 / 40

Operating the appliance
en
27
Start the programme
Press the
A
button. The indicator lamp
lights up and the program starts.
The display panel shows the Finish in
time while the program is running or the
program duration and the program
progress symbols once the wash cycle
has started.
Note: Foam detection
If the
o
symbol also lights up in the
display panel, the washing machine has
detected too much foam during the
wash cycle and automatically activated
additional rinse cycles to remove the
foam.
Add less detergent to the next wash
cycle with the same load.
If you want to lock the program to
prevent it from being inadvertently
adjusted, you can select the childproof
lock as follows.
Childproof lock
(
w
)
You can lock the appliance to prevent
the settings you have set from being
changed inadvertently. To do this,
activate the childproof lock.
Touch and hold the
rpm
0
and
Finish
in
û
buttons at the same time to
activate/deactivate
the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the
rpm
0
and
Finish in
û
buttons
for 3 seconds.
■
w
lights up: The childproof lock is
activated.
■
w
flashes: The childproof lock is
active and the programme selector
has been adjusted.
Note:
When the programme ends,
End
is displayed. The door is closed.
w
and
Õ
symbols remain on to remind
you to deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the
rpm
0
and
Finish
in
û
buttons until the symbol
w
disappears.
Adding/removing laundry
After starting the programme, you can
add or remove laundry if necessary.
Touch the
A
button. The appliance
checks whether reloading is possible.
If the following appears on the Touch-
Display:
■
The symbol
Õ
disappears, reloading
is possible.
■
The symbol
Õ
lights up, reloading is
not possible.
To continue the programme, touch the
A
button. The programme continues
automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Touch the
A
button.
2.
Select another programme.
3.
And touch the
‹
button again. The
new programme starts from the
beginning.