Siemens WT47XMH0EU, Инструкция по установке и эксплуатации

Страница: 25 / 64

Overview of programmes
en
25
0
Settings
Programme set-
ting
Function
Note: Not all settings can be activated in every programme. The activated settings are displayed on the but-
tons or highlighted brightly in the display. You can change or deactivate the activated settings by repeatedly
pressing on the relevant buttons on the display.
Remote Start
}
Pressing Remote Start
}
allows you to start the appliance remotely via the
Home Connect app or to call up the Home Connect settings.
Notes
■
Please observe the instructions for the ambient temperatures
~
Page 60 .
■
Remote start can only be activated if the appliance door is closed and the appli-
ance is connected to your home network.
■
Remote start is deactivated for safety reasons in the following circumstances:
■
Open the door,
■
Power failure,
■
Press Start/Reload
‹
on the appliance,
■
Briefly press Remote Start again,
■
Press
#
to switch off the appliance.
Drying Aim
Ù
: The dryness level defines how damp or dry the laundry is after the programme ends.
If you have set a dryness level, this is retained even after the appliance has been
switched off for the relevant programme. Exception: The settings are not saved for
Cottons.
Ò
Cupboard Dry
Plus
Multi-layered, thick laundry that does not dry readily.
»
Cupboard Dry Normal, single-layered laundry.
Ø
Iron Dry Normal, single-layered laundry that still needs to be damp after drying and is suitable
for ironing or hanging up.
Drying Level
w
If you think the laundry is still too damp when the drying programme has ended, you
can adjust the degree of dryness to achieve a particular dryness level. To increase the
dryness level, set the degree of dryness to between
Ô
and
ÔÔÔ
. This extends the
programme duration but the temperature remains the same.
Once you have adjusted the degree of dryness for a dryness level, this setting is
retained even after the appliance is switched off.
M
Finish in
B
N
Before starting the programme, you can delay the time at which the programme
ends by up to 24 hours using
M
and
N
.
The set time in hours, e.g. 8 h, is shown in the display and counts down until the pro-
gramme starts. Once the programme has started, the programme duration is dis-
played.
Note: Observe the information about the ambient temperatures
~
Page 60 .
M
Finish in
B
N
The drying time for
û
timed programmes can be extended in 10-minute incre-
ments using
M
and
N
.