Siemens WT47W4E9DN, Инструкция по установке и эксплуатации

Страница: 15 / 40

Draining the condensation water
en
15
Œ
Draining the
condensation water
Draining the condensation water
Condensation will form in the appliance
as it dries the laundry.
You must ensure that the drain hose is
connected when you operate the
appliance.
If there is no drain hose connected to
the appliance, the condensation water
from the appliance will run into the
condensation container. In this case,
you will need to empty the condensation
container each time the dryer finishes
drying the laundry, and also if it
becomes full before drying is complete.
Connect the drain hose as follows:
1.
Remove the accessories from the
dryer drum.
2.
When the dryer is delivered from the
factory, the hose for discharging the
condensation into the condensation
container is fastened to the
connecting piece.
3.
Disconnect the hose from the
connecting piece and put it in the
"parked" position.
4.
Take the drain hose from the
accessories and secure it to the free
connecting piece.