en
Cleaning and maintenance
18
7.
Close the service flap.
Note:
To prevent unused detergent
from flowing into the outlet during the
next wash: Pour 1 litre of water into
dispenser
II
and start the
p
Empty
programme.
The drain hose at the siphon
is blocked
1.
Set the programme selector to the
“Off” position. Pull out the mains
plug.
2.
Loosen hose clip and carefully
remove drainage hose.
Residual water may run out.
3.
Clean the drainage hose and siphon
connecting piece.
4.
Re-attach the drainage hose and
secure the connection point using
the hose clip.
Filter in the water supply
blocked
First, reduce the water pressure in the
inlet hose:
1.
Turn off the tap.
2.
Select any programme (except
0
Spin and
p
Empty).
3.
Press the Start button. Allow the
programme to run for approx. 40 s.
4.
Set the programme selector to the
“Off” position. Unplug the mains
plug.
5.
Clean the filter on the tap:
Disconnect the hose from the tap.
Clean the filter with a small brush.
6.
Clean the filter on the back of the
appliance:
Disconnect the hose from the rear of
the appliance,
Use pliers to remove the filter and
then clean it.
7.
Connect the hose and check for
leaks.
