Operating the appliance
en
15
Start the programme
Select the Start button. The indicator
lamp lights up and the programme
starts.
The indicator lamps on the status
display indicate the programme
progress.
Changing the programme
If you have started a wrong programme
by mistake, you can change the
programme as follows:
1.
Select the Start button to pause the
programme.
2.
Select another programme.
3.
Select Start button for starting the
programme. The new programme
starts from the beginning.
Cancel the programme
For programmes at high temperature:
1.
Select the Start button to pause the
programme.
2.
To cool down washing: Select
q
Rinse programme.
3.
Press the Start button.
For programmes at low temperatures:
1.
Select the Start button to pause the
programme.
2.
Select
0
Spin or
p
Empty.
3.
Press the Start button again.
Programme end during rinse
hold
To end the programme:
1.
Select
p
Empty.
2.
Press the Start button.
Programme end
The
End
indicator lamp flashes.
Removing laundry/switching
off the appliance
1.
Open the door and remove the
washing.
2.
Set the programme selector to the
“Off” position. The appliance is
switched off.
3.
Turn off the tap.
Not required for Aqua-Stop models.
Contents of package
Notes
– Do not leave any items of laundry
in the drum. They may shrink in
the next wash or discolour
another item.
– Remove any foreign objects from
the drum and the rubber seal –
risk of rusting.
– Leave the door and detergent
drawer open so that any residual
water can dry away.
– Always remove the washing.
– Always wait until the programme
ends, as the appliance could still
be locked.
– If the display panel goes off at the
end of a programme, the energy-
saving mode is active. To
activate, select any button.
