Siemens WQ33G2D1NL, Руководство пользователя

Страница: 15 / 52

Set up and connectNL
3.
Push the water drain hose onto
the connection as far as it will go.
Connection types for water drainage
PAY ATTENTION!
With a clogged or closed drain,
accumulated waste water can flow
back into the unit.
▶
Before using the device, ensure
that the waste water drains quickly
and clears blockages.
Drain in a
siphon.
The connection position
tie with a
hose clamp
(12-22 mm) bore
gene.
the water
feeding hose with
a hose guide
thing on minimum
80 cm and maximum
times 100 cm
height confirmation
gene.
4.
Insert the water drain hose into
the hose guide.
Remark:Of
the Y-divider
→ Page 29
can you replace the
water drain hose from
an additional device
rate like e.g.
a washing machine
on the same
connect feed from
the siphon.
Make sure that the water
drain hose is not kinked.
5.
Connect the appliance to the
water outlet.
→
†Connection types for water
drainage", page 15
Tip:To collect the condensed water
again in the condensed water
container (e.g. if the location of the
device is changed), undo these steps
in reverse order.
Drain in a
sink.
the water
feed hose com-
crack through the
slide and with
the confirmation
material securing
at.
on the bend
maximum 100
cm height
settle.
2
1
15