Siemens WQ33G2D1NL Скачать руководство пользователя

Страница: 5 / 52

SafetyNL

1.4 Secure installation

Observe the safety regulations when installing the device.

WARNING ‒ Risk of electric shock! Improper

installations are dangerous.

▶

Connect and operate the device only in accordance with the

information on the type plate.

▶

Only connect the device to a mains supply with alternating

current via a properly installed earthing socket.

▶

The protective earth system of the electrical house installation must be

installed in accordance with the electrical engineering regulations. The

installation must have a sufficiently large conductor diameter.

▶

When using an earth leakage circuit breaker, only use a type

marked with .

▶

Never power the device via an external switching device, e.g. a

time switch or remote control.

▶

Never connect the appliance to a circuit that is regularly switched

on and off by the utility.

▶

When the device is installed, the mains plug of the mains

connection cable must be freely accessible or, if free access is not

possible, an all-pole disconnecting device must be installed in the

permanently installed electrical system in accordance with the

installation instructions.

▶

When setting up the device, make sure that the power cord is

not pinched or damaged.

Damaged power cord insulation is dangerous.

▶

Never bring the connecting cable into contact with hot

appliance parts or heat sources.

▶

Never bring the power cable into contact with sharp points or

edges.

▶

Never kink, pinch or alter the power cord.

Содержание WQ33G2D1NL





















































Результаты поиска

Содержание WQ33G2D1NL

Отзывы:

Похожие инструкции для WQ33G2D1NL

Бренды по названию

Популярные бренды

Siemens WQ33G2D1NL, Руководство пользователя

Результаты поиска

Содержание WQ33G2D1NL

Отзывы:

Похожие инструкции для WQ33G2D1NL

Бренды по названию

Популярные бренды