Operating the appliance
en
39
Starting the programme
Touch and hold
Έναρξη
/
Παύση
(Start/
Pause)
button for 1~2 seconds, then
release the button. The programme
starts and the appliance door is locked.
The finish-in time is shown in the display
panel and counts down until the
programme starts. After the programme
has started, the programme duration is
displayed. And the symbols for the
programme progress are lighting up.
Childproof lock
You can lock the appliance to prevent
the settings you have set from being
changed inadvertently. To do this,
activate the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the
varioSpeed
and
Λήξη
σε
/
Διάρκεια
(Ready in/Time Dry)
buttons
for 3 seconds. The symbol
w
lights up
in the display panel.
■
w
lights up: The childproof lock is
activated.
■
w
flashes: If the programme and
programme settings are adjusted
while childproof lock is activated.
Note:
When the programme ends,
“Ÿš
is displayed. The door is unlocked.
w
symbol remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the
varioSpeed
and
Λήξη
σε
/
Διάρκεια
(Ready in/Time Dry)
buttons until the symbol
w
disappears.
Adding/removing laundry
After starting the programme (only for
washing), you can add or remove
laundry if necessary.
Touch the
Έναρξη
/
Παύση
(Start/
Pause)
button. The appliance checks
whether reloading is possible.
If the following appears on the display
panel:
■
The symbol
Õ
disappears,
reloading is possible.
■
The symbol
Õ
lights up, reloading is
not possible.
To continue the programme, touch the
Έναρξη
/
Παύση
(Start/Pause)
button.
The programme continues
automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Changing the programme
If you have started the wrong
programme by mistake, you can
change the programme as follows:
1.
Touch the
Έναρξη
/
Παύση
(Start/
Pause)
button.
2.
Select another programme.
3.
And touch the
Έναρξη
/
Παύση
(Start/Pause)
button again. The new
programme starts from the
beginning.
Note:
If drying is activated, after
touching the
Έναρξη
/
Παύση
(Start/
Pause)
button, when the
•©£
is
displayed, waiting for the appliance
running to cool down the laundry till the
•©£
disappears, then select another
programme.