Siemens WM6HXKE0DN, Руководство пользователя и инструкции по сборке

Страница: 58 / 72

en
Troubleshooting
58
Fault Cause troubleshooting
"E:10 / -00 / -10 / -20" The pump for the intelligent
dosing system is blocked.
1.
Switch off the appliance.
2.
Clean the pump unit.
→
"Cleaning the detergent drawer",
Page 50
3.
If this indicator appears again, call
our after-sales service.
→
"Customer Service", Page 68
Note: You can start the washing pro-
gramme if you deactivate the intelli-
gent dosing system and dose manu-
ally.
→
"Buttons", Page 25
"E:60 / -2B" The unbalanced load detec-
tion system has interrupted
the spin cycle because the
laundry is unevenly distrib-
uted.
▶
Redistribute the laundry in the
drum.
Note: Where possible, mix large and
small items in the drum. Different sized
items of laundry distribute themselves
better during the spin cycle.
⁠ The water pressure is low. No remedial action possible.
The filter in the water inflow
is blocked.
▶
"Clean the water inflow filter"
→
Page 55 .
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is
kinked or jammed.
▶
Ensure that the water inlet hose is
not kinked or jammed.
"E:35 / -10" There is water in the base
trough.
▶
Turn off the water tap.
▶
Call the after-sales service.
→ "Customer Service", Page 68
The appliance is leaking.
▶
Turn off the water tap.
▶
Call the after-sales service.
→ "Customer Service", Page 68
⁠ The detergent drawer has
not been pushed in as far as
it can go.
▶
Push the detergent drawer in as far
as it will go.
The pump unit is not inser-
ted.
1.
Insert the pump unit into the deter-
gent drawer.
→
"Cleaning the detergent drawer",
Page 50
2.
Push the detergent drawer in as far
as it will go.