en
Cleaning and servicing
54
‒
The filter insert in the pump hous-
ing may become stuck due to
coarse particles of dirt. Loosen
the dirt and remove the filter in-
sert.
2.
Clean the inside and the thread on
the pump cap and pump housing.
3.
Make sure that the impeller in the
drain pump can be turned.
4.
Replace the pump cap.
Make sure that the components of
the pump cap are securely seated.
5.
Screw on the pump cap.
90°
The handle on the pump cap must
be in a vertical position.
6.
Insert the maintenance flap and lock
it into place.
1
2
7.
Close the maintenance flap.
Before the next wash
To prevent unused detergent from flow-
ing straight into the outlet in the next
wash, run the
Drain
programme after
you have emptied the drain pump.
1.
Turn on the tap.
2.
Insert the mains plug.
3.
Switch on the appliance.
4.
Pour approx. 1 litre of water into the
manual dosing compartment.
5.
Start the
Drain
programme.
Содержание WM6HXEL0DN
Страница 71: ......
