Siemens WM16W790ES Скачать руководство пользователя страница 36

Страница: 36 / 56

Additional programme settings

The maximum speed that can be set

depends on the model and programme

that has been selected.

Ready in

(terminado en/em)

Before starting the programme

, you

can preselect the programme end

("Ready in" time) in hourly increments (h

= hour) up to a maximum of 24 hours.

To do this:

Select a programme.

The programme duration is

displayed for the selected

programme, e.g.

2:30

(hours:minutes).

Press the

Ready in

button

repeatedly until the required number

of hours is displayed.

Note:

The setting values are

increased using the

Ready in +

button, and decreased using the

Ready in -

button.

Press the

button.

The programme starts.

The selected number of hours (e.g.

) is shown in the display panel and

counts down until the wash

programme starts. The duration of

the programme is then displayed.

Note:

The length of the programme is

automatically adjusted when the

programme is running. Changes to the

default programme settings or

programme settings may also change

the programme duration.

After starting the programme

(if a

Ready in time has been selected and

the wash programme has not yet

started), you can change the

preselected number of hours as follows:

Press the

button.

Use the

Ready in

button to

change the number of hours.

Press the

button.

After starting the programme

, you can

add or remove laundry if necessary.

Page 40

Additional programme

settings

Additional programme settings

An overview of all additional settings,

which can be selected depending on

the programme, can be found from

Page 30

speedPerfect

Washing in a shorter time while

achieving a washing result that is

consistent with, but uses more energy

than, the selected programme, without

the speedPerfect

setting.

Note:

Do not exceed the maximum

load.

Overview of programmes

Page 30

ecoPerfect

Energy-optimised washing by reducing

the temperature while achieving a

washing result that is consistent with the

selected programme, without the

ecoPerfect

setting.

Prewash

(prelav.

)

For heavily soiled laundry.

Note:

Pour detergent into

compartments

and

Содержание WM16W790ES

























































Результаты поиска

Содержание WM16W790ES

Отзывы:

Похожие инструкции для WM16W790ES

Бренды по названию

Популярные бренды

Siemens WM16W790ES, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WM16W790ES

Отзывы:

Похожие инструкции для WM16W790ES

Бренды по названию

Популярные бренды