Siemens WM16W790ES Скачать руководство пользователя страница 20

Страница: 20 / 56

Positioning and connecting

Levelling

Align the appliance using a spirit level.
Incorrect alignment may result in loud

noises, vibrations and machine

"movement".

Loosen the lock nuts using a WAF17

spanner, by turning it in a clockwise

direction.

Check the alignment of the washing

machine with a spirit level, and

adjust it if necessary. Change the

height by turning the appliance feet.

All four appliance feet must stand

firmly on the ground.

The lock nuts on all four appliance

feet must be screwed tightly against

the housing using a suitable WAF17

spanner. In doing so, hold the foot

tight and do not adjust its height.

Electrical connection

Warning

Danger of death!

There is a risk of electric shock if you

touch live components.

■

Never touch or hold the mains plug

with wet hands.

■

Only pull out the mains cable by the

plug and never by the cable, as this

could damage it.

■

Never unplug the mains plug during

operation.

Observe the following information and

ensure that:

Notes

■

The mains voltage and voltage

indicated on the washing machine

(rating plate) are the same.

The connected load and fuse

required are specified on the rating

plate.

■

The washing machine is only

connected to an alternating current

supply via a properly installed

earthed socket.

■

The mains plug fits the socket.

■

The cable cross-section is adequate.

■

The earthing system is properly

installed.

■

The mains cable is only replaced by

a qualified electrician (if this is

necessary). Replacement mains

cables are available from customer

services.

■

No multiple plugs/couplings or

extension cables are used.

■

If an earth-leakage circuit breaker is

used, only a type which displays the

symbol is used.

Only this symbol guarantees

compliance with the currently

applicable regulations.

■

The mains plug can be accessed at

all times. If this is not possible, in

order to comply with the relevant

safety regulations, a switch (2-pole

switch-off) must be built into the

permanent installation in accordance

with electrical installation regulations.

■

The mains cable is not kinked,

squashed, altered or cut through.

■

The mains cable does not come into

contact with heat sources.

Содержание WM16W790ES

























































Результаты поиска

Содержание WM16W790ES

Отзывы:

Похожие инструкции для WM16W790ES

Бренды по названию

Популярные бренды

Siemens WM16W790ES, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WM16W790ES

Отзывы:

Похожие инструкции для WM16W790ES

Бренды по названию

Популярные бренды