Siemens WM14Y540EE, Инструкция по эксплуатации

Страница: 39 / 60

39
Display panel/indi-
cator lights do not
function while the
appliance is running. – Power failure?
– Fuse tripped? Switch on/replace fuse.
– If the fault occurs repeatedly, call customer service.
~
Page 40
The programme
takes longer than
usual. – Not a fault – unbalanced load detection system adjusts
imbalance by repeatedly distributing the washing.
– Not a fault – foam detection system active – several rinse cycles
are switched on.
Detergent residue
on the washing. – Occasionally phosphate-free detergents contain water-
insoluble residue.
– Select
q
(Rinse) or brush the laundry after washing.
In the pause status
Inicio/Carga (Start/
Reload)
Ü
flashes
very quickly and a
signal sounds.
– Water level too high. Washing cannot be reloaded. Immediately
close washing machine door.
– Select Inicio /Carga ( Start /Reload)
Ü
to continue the pro-
gramme.
If a fault cannot be rectified (switching the machine on and off) or a repair is required:
– Switch off the appliance and pull out the mains plug.
– Turn off the tap and call customer service.
~
Page 40
Faults Cause/Remedy