Siemens WM14VE00CS, Руководство пользователя и инструкции по установке

Страница: 37 / 60

Intelligent dosing system
en
37
¡
Activate the intelligent dosing sys-
tem once the programme has
ended.
→
"Buttons", Page 24
Requirements
¡
The laundry is prepared.
→
"Preparing the laundry", Page 32
¡
The laundry is sorted.
¡
The laundry is placed in the appli-
ance.
→
"Loading laundry", Page 34
¡
The programme is set.
→
"Setting a programme", Page 33
¡
The intelligent dosing system is ac-
tivated.
→
"Display", Page 23
→ "Display", Page 23
1.
Fill the dispensers.
→
"Filling the dispensers",
Page 37
To replace the contents of the dis-
penser with another product, clean
the detergent drawer.
→
"Cleaning the detergent drawer",
Page 39
2.
If required, adjust the contents of
the dispenser →
Page 38 .
3.
If required, adjust the basic
dosage →
Page 38 .
4.
If required, adjust the programme
settings.
→
"Adjusting the programme set-
tings", Page 34
5.
Start the programme.
→
"Starting the programme",
Page 35
6.
Remove the laundry.
→
"Unloading the laundry",
Page 35
15.2 Filling the dispensers
If you want to use the intelligent dos-
ing system or if the appliance dis-
plays a notification during operation
of the appliance, fill the dispensers.
Note:
Fill the dispensers only with
suitable detergent and care products
→
Page 33 .
If you want to add more liquid deter-
gent or fabric softener in the dis-
penser, use the same product.
If you want to replace the liquid de-
tergent or fabric softener in the dis-
penser with another product, clean
the detergent drawer beforehand.
→
"Cleaning the detergent drawer",
Page 39
If you want to use both dispensers
for liquid detergent, adjust the con-
tents of the dispensers →
Page 38 .
Requirement:
The display shows a
notification to fill the dispenser.
→
"Display", Page 23
→ "Display", Page 23
1.
Pull out the detergent drawer.
2.
Open the dispenser cover.