Siemens WM14T761BY Скачать руководство пользователя

Страница: 31 / 48

Operating the appliance

Operating the

appliance

Operating the appliance

Preparing the washing

machine

Note:

The washing machine

must be

correctly installed

and

connected

From

Page 12

Connect the mains plug.

Turn on the water tap.

Open the door.

Check that the drum is completely

drained. Drain if necessary.

Switching on the appliance/

selecting a programme

Press the

button. The appliance is

switched on.
The

Cottons

programme set at the

factory is then always displayed.
The current settings and programme

information light up at full brightness

and the display

‹

flashes.

The settings that can be selected light

up at half brightness.

Notes

■

Temporary flashing of the display

informs you to run the programme

Drum Clean

or any other

programme soon at a washing

temperature of at least 60 °C.

■

If the

3 sec display flashes, the

childproof lock is active.

You must deactivate this first before

you can change settings or start the

programme.

Page 33

In appliances with a

drum light

The drum is lit after switching on the

appliance, after opening and closing the

door and after starting a programme.

The light switches off automatically.

You can:

■

Use this programme and load

laundry.

Page 32

■

Or select another programme.

You can find an overview of all

programmes on the printed

supplement for the installation and

operating instructions.

■

Or change the programme default

settings.

Page 31

■

And/or select additional programme

settings.

Page 31

Change the programme

default settings

To change the current settings, touch

the button you require on the control

panel and the relevant indicator will

switch to full brightness.
You can change Finish in-time by

touching

Programme default settings

Page 29

Select additional programme

settings

By selecting additional settings, you can

better adapt the washing process to

your items of laundry.
To do this, touch the required control

panel; the relevant display switches to

full brightness.
Additional programme settings

Page 30

Содержание WM14T761BY

















































Результаты поиска

Содержание WM14T761BY

Отзывы:

Похожие инструкции для WM14T761BY

Бренды по названию

Популярные бренды

Siemens WM14T761BY, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WM14T761BY

Отзывы:

Похожие инструкции для WM14T761BY

Бренды по названию

Популярные бренды