a
a
a
a
3
Remove transportation protection devices
Before using the appliance for the first time, remove the
4 transportation protection devices completely and keep in a safe
place.
If the appliance is to be transported at a later date, re-install the
transportation protection devices prevents damage to the machine.
a
Page 6
Keep screw and sleeve together.
1.
Take hoses (depending on model) out of the
holders and the elbow. Remove the elbow.
2.
Loosen and remove all 4 transportation lock screws.
3.
Take the power cord out of the holders.
Remove sleeves.
4.
Insert covers and lock firmly by pressing on the locking hook at the top. Insert hose holder.
5.
Secure hoses in the hose holders.
4
Water connection
depending on model
Risk of electric shock!
Do not immerse Aqua-Stop safety device in water (contains
an electric valve).
To prevent leakage or water damage, follow the instructions in this chapter!
Caution:
The washing machine must only be operated with cold tap water.
Do not connect to the mixer tap of an unpressurised hot-water apparatus.
Use only the supplied inlet hose or one purchased from an authorised specialist outlet,
not a used one!
If in doubt, have the appliance connected by a technician.
Water supply
Water inlet hose:
Caution:
do not kink, crush, modify or sever
(strength is no longer guaranteed).
Optimum water pressure in the mains: 1001000 kPa (110 bar)
When the tap is turned on, the water flow is at least 8l/min.
If the water pressure is higher, install a pressure reducing valve.
Model:
Aqua-Stop
Aqua-Secure
Standard
1.
Connect water inlet hose to a 3/4" = 26.4 mm tap.
Caution:
Tighten plastic screw-fittings by hand only.
2.
Carefully turn on the tap and check that the connection
points are not leaking.
Caution:
Screw connection is under water pipe
pressure.
Water drainage
Water drainage hose:
Caution:
Do not bend or pull.
Height difference between installation area and outlet:
0 max. 100 cm
Drainage into a washbasin:
Caution:
Secure the drainage hose to prevent it from slipping out of the
sink.
Caution:
The plug must not block the drain of the wash basin. When the
water is being pumped out of the washing machine, check that the water
drains away quickly enough. The end of the drainage hose must not be
immersed in the drained water! Risk of water being drawn back into the
washing machine!
Drainage into a siphon:
Caution:
Connection point must be secured with hose clip, Ø 2440 mm
(specialist outlet).
.
Drainage into a plastic pipe with rubber sleeve or into a gully:
Caution:
Secure the drainage hose to prevent it from slipping out of the
sink.
max.
90°
max.
90°
min.
10 mm
min.
10 mm
3/4
3/4
ʑ
ʑ
ʑ
ʑ
ʑ
ʑ
ʑ
ʑ
a
a
a
a
B C
ʑ
ʑ
ʑ
ʑ
a
