Siemens WM14PIHDN, Руководство пользователя и инструкции по установке

Страница: 61 / 76

Troubleshooting
en
61
Fault Cause and troubleshooting
The programme does
not start.
▶
→ "Deactivating the childproof lock", Page 44
/ is activated.
▶
Check whether / is activated.
→
"Buttons", Page 24
Laundry is caught in the door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press to start the programme.
The detergent drawer has not been pushed in as far
as it can go.
▶
Push the detergent drawer in as far as it will go.
The pump for the intelligent dosing system is blocked.
1.
Switch off the appliance.
2.
Clean the pump unit.
→
"Cleaning the detergent drawer", Page 50
3.
If this indicator appears again, call our after-sales
service.
→
"Customer Service", Page 71
Note:
You can start the washing programme if you de-
activate the intelligent dosing system and dose manu-
ally.
→
"Buttons", Page 24
The door cannot
be opened. is activated.
▶
Continue the programme by selecting
Spin
or
Drain
and pressing .
The temperature is too high.
▶
Wait until the temperature has dropped.
▶
→ "Cancelling the programme", Page 43
Water level is too high.
▶
Start the
Drain
programme.
Power failure.
▶
Open the door using the emergency release.
→
"Emergency release", Page 69
The water is not drain-
ing. Drain pipe or water outlet hose is blocked.
▶
Clean the drain pipe and the water outlet hose.
Drain pipe or water drain hose is caught or jammed.
▶
Ensure that the drain pipe and water drain hose are
not kinked or trapped.