Siemens WM14PIHDN, Руководство пользователя и инструкции по установке

Страница: 59 / 76

Troubleshooting
en
59
Fault Cause and troubleshooting
"E:36 / -10"
▶
Remove any unapproved extensions from the water
hose. Connecting the appliance
"E:36 / -25 / -26" Drain pump is blocked.
▶
→ "Cleaning the drain pump", Page 52
"E:10 / -00 / -10 /
-20" The pump for the intelligent dosing system is blocked.
1.
Switch off the appliance.
2.
Clean the pump unit.
→
"Cleaning the detergent drawer", Page 50
3.
If this indicator appears again, call our after-sales
service.
→
"Customer Service", Page 71
Note:
You can start the washing programme if you de-
activate the intelligent dosing system and dose manu-
ally.
→
"Buttons", Page 24
The water pressure is low.
No remedial action possible.
The filters in the water inflow are blocked.
▶
Clean the filters in the water inflow → Page 55 .
The tap is turned off.
▶
Turn on the tap.
The water inlet hose is kinked or jammed.
▶
Ensure that the water inlet hose is not kinked or
jammed.
The detergent drawer has not been pushed in as far
as it can go.
▶
Push the detergent drawer in as far as it will go.
The pump unit is not inserted.
1.
Insert the pump unit into the detergent drawer.
→
"Cleaning the detergent drawer", Page 50
2.
Push the detergent drawer in as far as it will go.
flashes. The automatic voltage control system detects an un-
authorised voltage under-usage.
▶
No remedial action possible.
Note:
If the power supply is stable, the programme
continues to run as normal.
Voltage under-usage may cause extension of a pro-
gramme.
No remedial action possible.