Siemens WM12W440IN Скачать руководство пользователя страница 44

Страница: 44 / 48

Positioning and connecting

Electrical connection

Warning

Danger of death!

There is a risk of electric shock if you

touch live components.

■

Never touch or hold the mains plug

with wet hands.

■

Only pull out the mains cable by the

plug and never by the cable, as this

could damage it.

■

Never unplug the mains plug during

operation.

Observe the following information and

ensure that:

Notes

■

The mains voltage and voltage

indicated on the washing machine

(rating plate) are the same.

The connected load and fuse

required are specified on the rating

plate.

■

The mains plug fits the socket.

■

The cable cross-section is adequate.

■

The mains cable is only replaced by

a qualified electrician (if this is

necessary). Replacement mains

cables are available from the after-

sales service.

■

No multiple plugs/couplings or

extension cables are used.

■

If an earth-leakage circuit breaker is

used, only a type which displays this

symbol is used:

Only this symbol guarantees

compliance with the currently

applicable regulations.

■

The mains plug can be accessed at

all times.

■

The mains cable is not bent,

squashed, modified, cut through, or

in contact with heat sources.

Grounding Instructions

Warning

Danger of death!

Improper connection of the ground may

result in electric shock. Have the

appliance checked by a qualified

technician or licensed electrician if you

are in doubt as to whether the washing

machine has been properly grounded.

This appliance must be grounded. In the

event of malfunction or breakdown,

grounding will reduce the risk of electric

shock by providing a path of least

resistance for the electric current. This

appliance is equipped with a cord that

has an equipment grounding conductor

and a grounding plug. The plug must be

plugged into an appropriate outlet that

is properly installed and grounded in

accordance with local codes and

ordinances. To ground the appliance

use a 3 pin plug and properly grounded

socket of 16 A rating.

Notes

■

Do not modify the plug provided with

the appliance. If the plug will not fit

into outlet have a properly grounded

outlet installed by qualified

electrician. Do not cut, remove or

bypass the grounding prong on the

washing machine power cord plug.

■

The wiring for the eletrical outlet

circuit must be sufficient to meet the

appliance requirements. Use of

Ground Fault Circuit Interrupter

(GFCI) is recommended.

■

Do not use the machine with an

extension box, extension cord, spike

busters etc., as this may lead to

improper grounding conditions.

Содержание WM12W440IN

















































Результаты поиска

Содержание WM12W440IN

Отзывы:

Похожие инструкции для WM12W440IN

Бренды по названию

Популярные бренды

Siemens WM12W440IN, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WM12W440IN

Отзывы:

Похожие инструкции для WM12W440IN

Бренды по названию

Популярные бренды