Technical data
en
31
Spin efficiency class
The spin efficiency class of your
appliance can be seen on the energy
label.
The percentage of residual moisture for
the spin efficiency class in question can
be seen in the following table.
J
Technical data
Tec
hn
ical
d
at
a
Dimensions:
850 x 600 x 590 mm
(Height x width x depth)
Weight
63-83 kg (depending on model)
Mains connection:
Mains voltage 220-240 V, 50 Hz
Nominal current 10 A
Nominal output 2300 W
Water pressure:
100-1000 kPa (1-10 bar)
Power consumption when switched off:
0.14 W
Power consumption when ready for use
(left-on mode):
1.38 W
5
Positioning and
connecting
Po
si
ti
on
in
g
a
nd
co
nne
ct
in
g
Included with the appliance
Note:
Check the machine for transport
damage. Never use a damaged
machine. If you have a complaint,
please contact the retailer from whom
you purchased the appliance, or our
after-sales service.
Î
Cottons 60 °C + eco
4 kg
0,94 kWh
48 l
3
^
h
Î
Cottons 40 °C + eco
4 kg
0,63 kWh
48 l
3
]
h
Pro button
Load
Approximate consumption values
Energy consumption Water
Programme dura-
tion
Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU with cold wa-
ter (15 °C).
The programme temperature information is based on the temperature stated on the care label for the fab-
rics. The actual washing temperature may deviate from the stated programme temperature for energy-
saving reasons.
Spin efficiency class
Residual moisture D
in %
A (highest efficiency)
D < 45
B
45 <= D < 54
C
54 <= D < 63
D
63 <= D < 72
E
72 <= D < 81
