Siemens WM10B260IL, Руководство по эксплуатации, Страница: 2 / 8

7
9511 / 9000930511
WM10B260IL
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY
Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG
Programme overview
a
Refer to the table of consumption values on page 8 and the instructions on page 9.
*
reduced load
when using the
i
speedP
er
fect
option.
‘
Programmes without prewash - add detergent to compartment
II
, programmes with prewash - distribute the detergent between compartments
I
and
II
4
Pr
ogr
ammes
°C
max.
Type of laundr
y
Options; inf
or
mation
Êü
Co
tt
ons
Œ‹¥Ê
- 90
°
C
6 kg/
3,5 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen
i
speedPerfect
*
,
â
Easy Iron,
¢
ecoPerfect
+ Prewash
o
ª
ü Hy
giene
Œ‹¥Ê
- 60 °C
i
speedPerfect
*
,
â
Easy Iron,
¢
ecoPerfect; for particularly
sensitive skin, longer wash cycle at selected temperature, higher water level, additional rinse cycle
Ï
Easy-Care
Œ‹¥Ê
- 60 °C
2.5 kg
Easy-care fabrics made of cotton, linen, synthetic fibers or blended fabrics
i
speedPerfect,
â
Easy Iron,
¢
ecoPerfect
+ Prewash
o
Íü
Mix
Œ‹¥Ê
- 40 °C
Fabrics made of cotton or easy-care fabrics
i
speedPerfect,
â
Easy Iron,
¢
ecoPerfectt; different types of
laundry can be washed together
f
Dar
k W
ash
Œ‹¥Ê
- 40 °C
3 kg
Dark-coloured fabrics made of cotton and dark easy- care fabrics
i
speedPerfect,
â
Easy Iron,
¢
ecoPerfect; Reduced rinse
and final spin cycle
g
Shir
ts/Business
Œ‹¥Ê
- 60 °C
2 kg
Non-iron shirts made of cotton, linen, synthetic fibres or blended fabrics
i
speedPerfect,
â
Easy Iron,
¢
ecoPerfect;
â
Easy Iron: spin only, hang up dripping wet
5
Delicat
e/Silk
Œ‹¥Ê
- 40 °C
For delicate, washable fabrics, e.g. made of silk, satin, synthetic fibres or blended fabrics (e.g. curtains)
i
speedPerfect,
â
Easy Iron,
¢
ecoPerfect
:
W
ool
É
Œ‹¥Ê
- 40 °C
Hand or machine-washable fabrics made of wool or containing wool
Particularly gentle wash programme to prevent shrinkage of laundry. Longer programme breaks (fabrics rest in the detergent solution)
¼
Sportswear
Œ‹¥Ê
- 40 °C
Fabrics made from microfibre
i
speedPerfect,
â
Easy Iron,
¢
ecoPerfect
?
Super 30’/15’
Œ‹¥Ê
- 40 °C
3,5 kg 2 kg
Easy-care fabrics made of cotton, linen, synthetic fibres or blended fabrics
Short programme, suitable for lightly soiled items
A
dditional programmes
Rinse
m
, Spin
, Empty
l
11
8
Safety instructions
– Read the instruction manual and installation instructions and all other information enclosed
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug.
– Only plug in or disconnect the mains plug if your hands are dry.
Danger to life For worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug.
– Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking their lives.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of
children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion – Items of laundry pretreated with cleaning agents containing
solvents, e.g. stain remover/cleaning solvent may cause an
explosion after being loaded into the washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury – The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating.
Consumption values
Programme Load Electricity *** Water *** Programme duration ***
Êü
Cottons 20 °C 6 kg 0,30 kWh 68 l 2
@
h
Êü
Cottons 40 °C* 6 kg 0,95 kWh 68 l 2
@
h
Êü
Cottons 60 °C 6 kg 1,60 kWh 68 l 2
@
h
Êü
Cottons 90 °C 6 kg 2,45 kWh 76 l 2
@
h
Ïü
Easy-Care 40 °C* 3 kg 0,70 kWh 46 l 1
B
h
Íü
Mix 40 °C 2.5 kg 0,40 kWh 44 l 1 h
5ü
Delicate/Silk 30 °C 2 kg 0,30 kWh 37 l B h
ÿü Wool Éü 30 °C 2 kg 0,20 kWh 43 l B h
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
** Programme setting for testing and energy labelling in accordance with europian standard 60456 Ed. 4 with cold
water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
9
Important information
Before washing for the first time
Do not put any laundry in the machine. Turn the tap on. Pour into compartment II :
– approx. 1 litre water
– detergent (dosage according to the manufacturer's instructions for light soiling and the appropriate
degree of water hardness)
Turn the programme selector to
Ï
Easy-care 60 °C and press Start /Pause . At the end of the
programme, turn the programme selector to Off.
Protecting the laundry and the machine
– When measuring the amount of all detergents/additives and cleaning agents, always check the
manufacturer's instructions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry bag.
Loading laundry
Load items of laundry of varying sizes.
Take care not to trap items of laundry between the washing machine door and the rubber seal.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not prewash. If required, select the
i
speedPerfect option.
Pretreat any stains as necessary.
heavy Do not load as much laundry. Select the programme with prewash .
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions.
Turn the programme selector to
Ê
Cottons 30 °C and press Start /Pause . After approx. 10
minutes, press Start/ Pause to stop the programme. Once the required soaking time has elapsed,
press Start /Pause again to continue the programme or to select a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liquid starch is used. Pour starch into the ~ fabric
softener compartment in accordance with the manufacturer's instructions (rinse first if necessary).
Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always
follow the dye manufacturer's instructions. Do
not use the washing machine for bleaching clothes.
I nsert for liquid detergent
depending on model
Position the insert for dispensing liquid detergent:
– Remove the detergent drawer completely
a page 10 .
– Slide the insert forwards.
Do not use the insert (slide upwards):
– For gel-type detergents and washing powder,
– for programmes with Prewash (Vorwäsche) or the
(Finished in)
function.
Cleaning and care
ʑ
Machine housing, control panel
– Remove detergent residue immediately.
– Wipe off with a soft, damp cloth.
– Do not clean with a jet of water.
10
Cleaning and care
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2.
To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
ʑ
Drum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not steel wool.
ʑ
Descaling Make sure that there is no laundry in the machine.
This should not be necessary if the correct detergent dosage has been used. If it is necessary, however,
proceed according to the descaling agent manufacturer's instructions. Suitable descalers can be obtained via
our website or from our after-sales service (
a
page 1 ).
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
6.
Open the service flap
7. Carefully unscrew the pump cover (residual water).
8. Clean the interior, pump cover thread and pump housing (the impeller in the
detergent solution pump must rotate).
9. Replace the pump cover and screw it on tightly.
10. Replace the service flap.
To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of
water into compartment
II and start the Empty
l
programme.
Drainage hose at the siphon is blocked
Turn the programme selector to Off and disconnect the mains plug.
1.
Loosen the hose clamp and carefully remove the drainage hose (caution: residual
water).
2.
Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water inlet is blocked
Risk of electric shock
Do not immerse the Aqua-Stop safety device in water (it contains an electric valve).
Reduce the water pressure in the supply hose:
1.
Turn off the tap.
2. Select any programme (except for Spin
c
/ Empty
l
).
3. Press Start /Pause . Let the programme run for approximately 40 seconds.
4. Turn the programme selector to Off . Disconnect the mains plug.
Clean the filter:
5. Disconnect the hose from the tap.
Clean the filter with a small brush.
and/or on standard and Aqua-Secure models:
Remove the hose from the rear of the appliance,
Take out the filter with a pair of pliers and clean it.
6. Connect the hose and check for leaks.
Risk of scalding
– Allow the detergent solution to cool down.
– Turn off the tap.
– Risk of electric shock. Disconnect the mains plug.
– Risk of explosion. No solvents.
11
What to do if...
ʑ
Water is leaking out. – Attach/replace the drainage hose correctly.
– Tighten the screw connection of the supply hose.
ʑ
No water supply.
Detergent not dispensed. – Start/ Pause not selected?
– Tap not turned on?
– Filter blocked? Clean the filter
a page 10.
– Supply hose kinked or trapped?
ʑ
Washing machine door
cannot be opened. – Safety function active. Programme stopped?
a
page 4 .
– - - - - (Rinse stop = no final spin) selected? a page 3,4.
ʑ
Programme does not start. – Start /Pause or (Finished in) time selected?
– Washing machine door closed?
– Childproof lock active? Deactivating
a page 5.
ʑ
Detergent solution is not
drained. – - - - - (Rinse stop = no final spin) selected?
a
page 3, 4.
– Clean the detergent solution pump
a
page 10.
– Clean the waste pipe and/or drainage hose.
ʑ
Water not visible in the
drum. – Not a fault - water below the visible area.
ʑ
Spin result not satisfactory.
Laundry wet/too damp. – Not a fault - the imbalance monitoring system has interrupted the spin
because the laundry is unevenly distributed.
Distribute large and small items of laundry evenly in the drum.
–
â
Easy Iron selected? a Page 5
– Speed selected too low? a page 5 .
ʑ
The programme duration
changes during the wash
cycle. – Not a fault - the programme cycle is optimised for the particular
washing process. This can cause changes in the programme duration
on the display panel.
ʑ
Spin cycle performed
several times. – Not a fault - unbalanced-load detection system is adjusting the
imbalance.
ʑ
Residual water in the 0
compartment for care
products.
– Not a fault - the action of the care product is not affected.
– Clean the insert if necessary
a page 10 .
ʑ
Odour formation in the
washing machine. – Run programme
Ê
Cottons 90 °C without laundry. Use standard
detergent.
ʑ
Status display
t
flashing.
Appliance has detected a
detergent overload.
– Too much detergent used?
Mix one tablespoonful of fabric softener with ½ litre water and pour
into compartment
II (Not for outdoor fabrics, sportswear fabrics or
those made with down.)
–
Reduce the detergent dosage for the next wash cycle
.
ʑ
Loud noises, vibrations and
“wandering” during the
spin cycle. – Are the appliance feet fixed?
Secure appliance feet a Installation instructions .
– Transportation safety devices removed?
Remove transportation safety devices a Installation instructions .
ʑ
Display panel/indicator
lamps do not function
during operation. – Power cut?
– Circuit breakers tripped? Switch the circuit breakers back on or
replace.
– If the fault occurs repeatedly, call the after-sales service.
ʑ
Programme sequence
longer than usual. – Not a fault - unbalanced-load detection system is adjusting the
imbalance by repeatedly redistributing the laundry.
– Not a fault - foam detection system active - adds an additional rinse
cycle.
ʑ
There are detergent
residues on the laundry. – Occasionally, phosphate-free detergents contain water-insoluble
residues.
– Select Rinse
m
or brush down the laundry after washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call the after-sales service a Installation instructions.
siemens-home.com/welcome
Register
your
product
online
Washing machine
WM10B260IL
en
Washing machine
operating instructions
Observe the safety instructions on page 8.
Read these instructions and the separate installation
instructions before operating the washing machine.