Intelligent dosing system
en
21
Notes
■
Only use easy-pour liquid products
that the manufacturer recommends
adding to the detergent drawer.
■
Do not mix different liquid
detergents. If changing your liquid
detergent (type, manufacturer, etc.),
empty the dispenser completely and
clean it.
■
Do not use products containing
solvents, caustic agents or volatile
substances (e.g. bleach).
■
Do not mix detergent and fabric
softener.
■
Do not use products that have
expired or are highly congealed.
■
To prevent drying out, do not leave
the dispenser lids open for a long
period of time.
Filling the dispensers:
The lids of the dispensers in the
detergent drawer are marked with the
following symbols:
■
ß
Standard/universal detergent
■
M
Fabric softener
1.
Open the detergent drawer.
2.
Open the dispenser lid(s).
3.
Add detergent and/or fabric
softener. Do not fill above the
max.
marking.
4.
Close the lid(s).
5.
Slowly push the detergent drawer in
completely.
When the detergent drawer is fully
pushed in, the display
Ó
goes out when
the appliance is switched on.
Everyday use
Displays:
■
The display
lights up
if intelligent
dosage has been selected for the
dispenser.
■
The display for the adjustment
values, e.g.
Y
flashes
if the fill level
for the dispenser is below the
minimum level when intelligent
dosing has been selected.
(De)selecting intelligent dosage and
adjusting the dosage strength:
The intelligent dosages for detergent
and fabric softener are set at the factory
for all programmes in which intelligent
dosing can be used.
You can find an overview of all possible
programme settings on the
supplementary sheet for the installation
and operating instructions.
The dosage strength has been preset to
X
(lightly soiled laundry) for detergent
ß
and to
Y
(medium level of softness)
for fabric softener
M
. It can be changed
individually for each programme.
In addition to intelligent dosing, washing
additives (e.g. stain remover) can be
added manually via the left-hand
compartment.
Note:
The selection (on/off) and the
selected dosage strength for
ß
i-Dos
and
M
i-Dos
are saved for
each programme until they are changed
again, even if the appliance is switched
off.
