Technical Data
08.90
Resolution
1
µ
m:
10
µ
m:
100
µ
m:
Feed rate
Input limit
lower
upper
Unit
1
10
100
20 000
200 000
200 000
mm/s
2
Unit
mm/s
2
Input limit
lower
upper
0,01
0,1
1,0
30 000.00
300 000.00
300 000.00
maximum traversing
speed
Unit
mm/min
Deceleration
Input limit
lower
upper
1
10
100
20 000
200 000
200 000
Basic resolution:
Allocation of encoder increments to the traversing path decimal
point display);
1 = 1
µ
m/Increment
2 = 10
µ
m/Increment
3 = 100
µ
m/Increment
The unit of the feed rate data is set in the following way: For the closed loop version, the
lowest place with a resolution of 1 has the value of 0,01 mm/min.
3.6
Flags, Times, Counter
Flag:
The flag area MB240-MB255 is dynamically used.This area can only be used for
provisional results.
M121.4 and M121.5 are used for display selection (see chapter 3.5).
Time:
None
Counter:
Counter 0 is used dynamically.
This counter can only be used conditionally.
3 - 8
©
Siemens AG 1990 All Rights Reserved 6ZB5 440-0JB02
WF 725/WF726 (PJ – NC Auxiliary axis and Tool magazine for SINUMERIK 3GA4)
