en
Faults and what to do about them
50
Faults and what to do about them
The indicator lamp of
the
Tambur bak
ı
m
(Drum Clean)
pro-
gramme flashes
Run the
Tambur bak
ı
m (Drum Clean) 90°C
programme to clean and care for the
drum and the outer tub.
Notes
■
Run the programme without laundry.
■
Use washing powder or a detergent containing bleach. To prevent foaming,
only use half the amount of detergent recommended by the detergent manu-
facturer. Do not use detergent designed for woollens or delicates.
■
Switching the Tambur bak
ı
m (Drum Clean) information signal on/off.
"Switching the drum-care information signal on/off" on page 43
Other displays
Switch off the appliance, wait for five seconds and then switch it on again. If the dis-
play appears again, call customer service.
Faults
Cause/Remedy
Water is leaking from the
appliance.
■
Attach the drain hose correctly or replace it.
■
Tighten the screw fitting on the supply hose.
The appliance is not filling
with water.
Detergent is not being dis-
pensed.
■
Programme does not start?
■
Is the water tap turned on?
■
Could the filter in the water supply be blocked?
"Filter in the water supply is blocked" on page 47
■
Is the supply hose kinked or trapped?
The wrong detergent/fab-
ric softener has been
poured into the dis-
penser(s).
Dispenser(s):
1.
Empty and clean.
2.
Refill.
Detergent/fabric softener
has congealed in the dis-
pensers.
Clean and refill the dispensers.
The door cannot be
opened.
■
The temperature in drum is too high to open the door.
■
The safety function is activated. Stop the programme?
■
The water level in drum is too high.
■
Can the door only be opened by the emergency release?
"Emergency release" on page 48
The programme will not
start.
■
Have you touched the
I
button or selected
f
(Finish in)
time?
■
Is the door closed?
■
Childproof lock activated? Deactivate childproof lock.
■
Shop mode activated? If the display shows
àœ©˜
for 5 s after you have
switched on or off the appliance, the appliance is in shop mode. Turn off
the shop mode as follows:
1.
Switch the appliance off and on again.
2.
Wait for the display message
àœ©˜
to disappear.
3.
Touch and hold
I
for at least 5 s.
The appliance will automatically switch off. You can use the appliance now as
usual.
Display
Cause/Remedy
