Unrestricted
13
©
2019 Siemens Industry, Inc.
814205 Rev02
The installer is responsible for:
1. Creating a cutout in the VersiComm enclosure for power cabling (Note: no cutouts were
added during manufacture which gives the installer the ability to choose which side of the
enclosure for the cutout. Cut out from the top is not suggested).
2. Selecting a conduit hub that will maintain the NEMA 4 rating of the device; if the chosen
conduit hub cannot maintain the NEMA 4 rating, the product warranty will be void.
When the cutout has been created, and the NEMA 4 or greater conduit hub is in place, remove
any metal shavings from the inside of the box to avoid damaging electronics. Wiring should be
as follows:.
VC1COMMA (120V)
