Siemens TI 905 Series, Руководство пользователя

Страница: 34 / 200

en
Trouble shooting
34
Coffee has no “crema”. Unsuitable type of coffee. Use a type of coffee with a higher pro-
portion of robusta beans.
The beans are no longer freshly
roasted.
Use fresh beans.
The grinding level is not suita-
ble for the coffee beans.
Set a finer grinding level.
The coffee is too “acidic”. The grinding level is too coarse
or the ground coffee is too
coarse.
Set a finer grinding level or use finer
ground coffee.
Unsuitable type of coffee. Use a darker roast.
The coffee is too “bitter”. The set grinding level is too fine
or the ground coffee is too fine.
Set a coarser grinding level or use
coarser ground coffee.
Unsuitable type of coffee. Change the type of coffee.
The coffee tastes “burnt”. The brewing temperature is too
high
Reduce the temperature.
~
"Adjusting beverage settings"
on page 18
The set grinding level is too fine
or the ground coffee is too fine.
Set a coarser grinding level or use
coarser ground coffee.
Unsuitable type of coffee. Change the type of coffee.
The water filter does not stay in
position in the water tank.
The water filter is not mounted
correctly.
Immerse the water filter into water until
no more air bubbles escape; insert the
filter again.
Firmly press the water filter straight
down into the tank connection.
The coffee grounds are not
compact and are too wet.
The set grinding level is too fine
or too coarse, or not enough
ground coffee has been used.
Set a coarser or finer grinding level or
use two level measuring spoons of
ground coffee.
Water dripped onto the inner
floor of the appliance when the
drip tray was removed.
Drip tray removed too early. Wait a few seconds after the last drink
was dispensed before removing the
drip tray.
The drip tray cannot be
removed.
The coffee grounds container is
very full.
The coffee grounds slider
becomes stuck.
Clean the interior of the brewing unit.
~
"Cleaning the brewing unit"
on page 29
Correctly insert the coffee grounds
slider.
The outlet system cannot be
assembled or disassembled.
Incorrect sequence Connect the outlet system (with milk
system) first, then connect the milk sys-
tem; alternatively, in the case of disas-
sembly, first remove the milk container
and then remove the outlet system.