Siemens TC65 Terminal Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 65

Siemens TC65 Terminal Скачать руководство пользователя страница 62

TC65 Terminal Hardware Interface Description
Confidential / Released

s

TC65 Terminal_HD_V02.000b

Page 62 of 65

19.02.2007

6.2

Compliance with FCC Rules and Regulations

As an integrated product, the TC65 Terminal is fully compliant with the grant of FCC
Equipment Authorization issued for the in-built TC65 Module, and therefore, bears the label

“Contains FCC ID QIPTC65”.

The FCC Equipment Authorization Certification for the TC65 Module is listed under the

FCC identifier QIPTC65

IC: 267W-TC65

granted to Siemens AG.

The Siemens reference application of the TC65 Module registered under the above
identifier is certified to be in accordance with the following Rules and Regulations of the
Federal Communications Commission (FCC). Power listed is ERP for Part 22 and EIRP for
Part 24.

“This device contains GSM and GPRS Class12 functions in the 900 and 1800MHz Band
which are not operational in U.S. Territories. This device is to be used only for mobile and
fixed applications. The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter. Users and installers must be
provided with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance. Antennas used for this OEM module must not exceed
8.4dBi gain (GSM 1900) and 2.9dBi (GSM 850) for mobile and fixed operating
configurations. This device is approved as a module to be installed in other devices.”

Please note that changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

6.3 Cable

Requirements

The TC65 Terminal has to be tested and approved for use with a maximum cable length of
3m for following interfaces:
- USB interface (shielded)
- Serial interface (RS232)
- ADC inputs
- GPIOs

The length of following lines may exceed 3m:
- DC power supply lines
- Audio interface
- Antenna interface

It is recommended to keep the digital lines for I²C-, SPI- lines as short as possible. The
maximum cable length is 150mm.

«
...
60
61
62
63
64
...
»

Содержание TC65 Terminal


































































Отзывы:

Нет отзывов