127
Settings
right page (127)
of SXG75, FUG us-en, A31008-H8900-A1-1-7619 (07.10.2005, 13:12)
© Siemens AG 2003, E:\Auftrag\Siemens\Mobil
ePhones\FCCs\sxg75\FUG\WOLF5_PhoneSetup.fm
Template: X75, Version 2.2;VAR La
nguage:
en;
VAR issue date: 050902
Eject card
Eject the
RS MultiMediaCard
from the
phone safely without losing data
that is still being transmitted to the
card.
C
Press to confirm request.
If card is still busy, confirm the error
message with
C
and try again later.
Memory assistant
Start the memory assistant
Phone identity
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
F
Switch between tabs to
display additional infor-
mation about the device.
Device check
After the last information page,
a self-test as well as the individual
test are offered. If you select
Self test
,
all individual tests are carried out.
Device manager (DM)
Sessions can be initiated in different
ways.
• Manual session: You start the DM
session via this menu option.
• WAP push: Your service provider
initiates a DM session via WAP
push (page 68). You receive an
Over The Air Provisioning (OTAP)
message. The message is dis-
played. Confirm the request to
start the DM session.
The OTAP message can be protect-
ed and you may need a PIN to
open it. Contact your provider for
further information.
• Software update: The phone
checks the software status each
time it is switched on. If an update
is available a request is displayed.
Confirm the requests to start the
software update and to re-boot
your phone.
Software version
To display the software version for your
phone in standby mode:
*
#
0
6
#
, and select the Configuration tab.
Additional information
If you want to start a session the battery
must be charged at least 50%.