Installation and Configuration Guidance
IP ROUTERS INSTALLATION GUIDE 3G OTU
667/CI/45025/000 Rev 4 Unrestricted
12
-65
24
Excellent
-63
25
Excellent
-61
26
Excellent
-59
27
Excellent
-57
28
Excellent
-55
29
Excellent
-53
30
Excellent
3.3.
Installation of the Antenna Cable
The Cable kits (667/1/46193/150 and /300) comes with:
•
15M or 30M lengths of reinforced coaxial antenna cable (998/4/25011/400)
•
PIB Self Amalgamating Tape (992/4/07906/000)
•
Female N-Type Connector (For termination in the controller Cabinet)
•
Male N-Type Connector (For Pole Top Termination)
•
Adapter SMA plug to ReSMA socket
•
ReSMA plug to N type plug pigtail cable.
•
N-Type Cable Termination Guide (667/CI/46193/ETC)
The reader is to refer to N-Type Cable Termination Guide (667/CI/46193/ETC) for details;
1
Install the cable between the Roadside Cabinet and traffic signal pole.
2
Terminate the antenna cable using a Male N-Type connector (See Terminating N-Type
Safety of
Cable Handling
Ensure that the bend radius is not less than 6 times the diameter of the cable at any time dur-
ing installation
Safety of
Cable Handling
The antenna should be installed as a single cable with no joins, and care must be taken not to
kink the cable. Once it has been kinked, it cannot be straightened without attenuating the
signal.
