Technical Instructions
Pressure Independent Control
Document No. 155-773
SSD Series Electronic Valve Actuators
September 1, 2015
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Product or company names mentioned herein may be trademarks of their respective owners.
© 2015 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089-4513
USA
+1-847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them to
Document No. 155-773
Printed in the USA
Page 8
Troubleshooting
Check
Wiring
for proper connections.
If the actuator does not provide full flow or full close-off, check that the actuator is
properly attached to the valve.
If not:
1. Turn the power off.
2. Manually retract output shaft with 3mm wrench to zero position.
3. Tighten the bonnet ring onto the valve completely.
4. Power up.
Dimensions
Figure 13. SSD Actuator Dimensions in Inches (Millimeters).
Figure 14. SSDx1.5U Actuator Dimensions in Inches (Millimeters).
Service Envelope
Minimum access space recommended:
8 inches (200 mm) above the actuator and beside the terminal plug.
