Troubleshooting
en
51
Washing results
Fault
Cause
troubleshooting
Tableware is not dry.
No rinse aid used or dosage
set too low.
1.
2.
Set the amount of rinse aid to be
dispensed.
"Setting the amount of rinse aid",
Programme or programme
option has no drying phase,
or the drying phase is too
brief.
▶
"Select a programme with drying,
e.g. intensive, strong or ECO pro-
gramme."
Some option buttons decrease the
drying result, e.g varioSpeed.
Water collects in recesses of
the tableware or cutlery.
▶
Position tableware at an angle
where possible.
The combined detergent
used has a poor drying per-
formance.
1.
Use rinse aid to improve drying per-
formance.
2.
Use a different combined detergent
with a better drying performance.
Extra Dry not activated to im-
prove drying performance.
▶
Activate Extra Dry.
Tableware removed too
early or drying process not
yet ended.
1.
Wait until the programme ends.
2.
Only remove tableware 30 minutes
after the programme has ended.
Rinse aid used has a limited
drying performance.
▶
Use a name-brand rinse aid.
Eco products may have limited ef-
fectiveness.
Appliance door does not
open automatically at the
end of the programme
▶
Adjust the appliance door as de-
scribed in the installation instruc-
tions.
The door gap must be at least
70 mm - 100 mm.
