Siemens SN25EI38CM, Руководство пользователя

Страница: 52 / 68

en
Troubleshooting
52
Fault Cause Troubleshooting
Remnants of food on table-
ware. Filters are soiled.
▶
Clean the filters.
→
"Cleaning filters", Page 44
Filters are inserted incor-
rectly and/or not engaged.
1.
Insert the filters properly.
→
"Filter system", Page 44
2.
Engage the filters.
Washing programme selec-
ted too weak.
▶
Select a more intensive washing
programme.
→
"Programmes", Page 19
▶
Adjust the sensitivity of the sensors.
→
"Sensors", Page 11
Tableware has been pre-
cleaned too intensely. The
sensors chose a weaker pro-
gramme. Stubborn soiling
cannot be entirely removed.
▶
Only remove large remnants of food
and do not prerinse tableware.
▶
Adjust the sensitivity of the sensors.
→ "Sensors", Page 11
Tall narrow receptacles in
corner areas are not rinsed
adequately.
▶
Do not position tall narrow recept-
acles at too great an angle or in
corner areas.
Top baskets on right and left
are not set to same height.
▶
Set the top baskets on the left and
right to the same level.
Detergent residue in the ap-
pliance Lid of the detergent dis-
penser is blocked by items
of tableware parts and will
not open.
1.
Arrange tableware in the top basket
tableware so the tab collecting tray
is not obstructed by tableware.
→
"Arrange tableware", Page 34
Items of tableware are blocking the
dispenser lid.
2.
Do not place tableware or fra-
grance dispensers in the tablet col-
lecting tray.
The lid of the detergent dis-
penser is blocked by the tab
and will not open.
▶
Position the tab in the detergent dis-
penser crosswise, not vertically.
Tabs are used in the quick
or short programme. Dissolv-
ing time of the tab is not at-
tained.
▶
Select a more intensive "Pro-
gramme"
→
Page 19 or use
"Powder detergent"
→
Page 31 .
Washing effect and dissolv-
ing performance are re-
duced after a prolonged
storage time or detergent is
very lumpy.
▶
Change your "detergent"
→
Page 31 .