Troubleshooting
en
45
Fault
Cause and troubleshooting
E:61-03 will light up
alternately. Water is
not drained.
Not an appliance fault. Wastewater pump is blocked
or the cover of the wastewater pump is loose.
1.
Clean the wastewater pump.
→
"Clean wastewater pump", Page 49
2.
Secure the cover of the wastewater pump so it
clicks into position.
→
"Clean wastewater pump", Page 49
E:92-40 will light up
alternately.
Filters are soiled or blocked.
▶
Clean the filters.
→
All LEDs lit up or
flashing.
Electronics have detected a fault.
1.
Press the main switch button for approx.
4 seconds.
The appliance is reset and restarted.
2.
If the problem occurs again:
‒
Switch off the appliance.
‒
Pull out the mains plug or switch off the fuse in
the fuse box.
‒
Wait at least 2 minutes.
‒
Switch on the fuse in the fuse box or insert the
mains plug.
‒
Switch the appliance on.
3.
If the problem occurs again:
‒
Contact customer service.
→