Siemens SITRANS FX300 Скачать руководство пользователя страница 28

Страница: 28 / 80

INSTALLATION

SITRANS FX300

www.siemens.com/flow

06/2009 - SFIDK.PS.050.F2.02 A5E02100423

3.6 Installation

3.6.1 General installation notes

The following procedures have to be carried out before installing the device:

•

Remove all transportation safety devices and protective coverings from the device.

•

Ensure that the gaskets have the same diameter as the pipelines.

•

Note the correct flow direction for the device. This is indicated by an arrow on the housing of

the measuring sensor.

•

On metering points with varying thermal loads, the flowmeters have to be mounted with stress

bolts (DIN 2510).

•

Stress bolts or bolts and nuts are not included in the scope of delivery.

•

Ensure that the measuring flange is concentrically fitted.

•

Note the exact installation length of the measuring device when preparing the metering point.

CAUTION!

Installation, assembly, start-up and maintenance may only be performed by appropriately
trained personnel. The regional occupational health and safety directives must always be
observed.

Figure 3-10: Preparing the metering point

Installation length of measuring thickness of gaskets.

CAUTION!

The internal diameter of the pipelines, the measuring sensor and the gaskets must match. The
gaskets may not protrude into the flow.

Figure 3-11: Internal diameter

Internal diameter connection pipe

Internal diameter flange and gasket

Internal diameter measuring sensor

MA_Siemens_Sitrans_FX300_R02_en_PRT.book Page 28 Monday, June 22, 2009 8:17 AM

Содержание SITRANS FX300

















































































Результаты поиска

Содержание SITRANS FX300

Отзывы:

Siemens SITRANS FX300, Руководство по эксплуатации, Страница: 28 / 80

Результаты поиска

Содержание SITRANS FX300

Отзывы: