Siemens SITRANS FX300 Скачать руководство пользователя страница 24

Страница: 24 / 80

INSTALLATION

SITRANS FX300

www.siemens.com/flow

06/2009 - SFIDK.PS.050.F2.02 A5E02100423

3.4.6 Turning the display

Turn the display as follows:

•

Disconnect the power supply from the measuring device.

•

Unscrew the cover in front of the display

from the connection housing.

•

Pull the display

carefully a few centimetres out of the anchor fitting and turn it to the

required position

•

Press the display onto the spacer pins

, until it clicks.

•

Turn the cover with gasket

back onto the housing and tighten it by hand.

DANGER!

All work on the device electrics may only be carried out by appropriately trained personnel. The
regional occupational health and safety directives must always be observed.

INFORMATION!

If the measuring device is installed in a vertical pipe, you will have to turn the display by 90

; if

installed below a pipe, turn 180

Figure 3-6: Turning the display

MA_Siemens_Sitrans_FX300_R02_en_PRT.book Page 24 Monday, June 22, 2009 8:17 AM

Содержание SITRANS FX300

















































































Результаты поиска

Содержание SITRANS FX300

Отзывы:

Siemens SITRANS FX300, Руководство по эксплуатации, Страница: 24 / 80

Результаты поиска

Содержание SITRANS FX300

Отзывы: