Siemens SITRANS FC310 Скачать руководство пользователя страница 45 | Manualshive

Страница: 45 / 54

Siemens SITRANS FC310 Скачать руководство пользователя страница 45

6.6

Disposal

Devices described in this manual should be recycled. They may not be

disposed of in the municipal waste disposal services according to the Di‐

rective 2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC, or to a locally ap‐

proved disposal service for eco-friendly recycling. Observe the specific reg‐

ulations valid in your country.
Further information about devices containing batteries can be found at: In‐

formation about battery / product return (WEEE) (

support.industry.siemens.com/cs/document/109479891/

Note
Special disposal required
The device includes components that require special disposal.
● Dispose of the device properly and environmentally through a local waste disposal

contractor.

Service and maintenance

6.6 Disposal

SITRANS FC310

Compact Operating Instructions, 01/2019, A5E44932112-AB

45

«
...
43
44
45
46
47
...
»

Содержание SITRANS FC310























































Отзывы:

Нет отзывов