Siemens SITRANS FC310 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 54

Siemens SITRANS FC310 Скачать руководство пользователя страница 43

CAUTION

Hot surfaces
Risk of burns during maintenance work on parts having surface temperatures exceeding

70 °C (158 °F).
● Take corresponding protective measures, for example by wearing protective gloves.
● After carrying out maintenance, remount touch protection measures.

CAUTION

Hot parts in the device
Temperatures that can burn unprotected skin may be present for some time after the device

has been switched off.
● Observe the waiting time specified in Technical data (Page 47) or on the device before

starting with maintenance work.

6.3.1

Ex-approved products

Note
Repair of Ex-approved products
It is the customer's responsibility that repair of Ex-approved products fulfill national

requirements.

CAUTION

Hazardous voltage at open device
Risk of electric shock when the enclosure is opened or enclosure parts are removed.
● Before you open the enclosure or remove enclosure parts, de-energize the device.
● If maintenance measures in an energized state are necessary, observe the particular

precautionary measures. Have maintenance work carried out by qualified personnel.

Service and maintenance

6.3 Maintenance and repair work

SITRANS FC310

Compact Operating Instructions, 01/2019, A5E44932112-AB

43

«
...
41
42
43
44
45
...
»

Содержание SITRANS FC310























































Отзывы:

Нет отзывов