Siemens SITRANS F MASS 6000 Ex d, Руководство по эксплуатации, Страница: 21 / 31

SITRANS F C MASSFLO
£
20
A5E02944883-A %
&RPPLVVLRQLQJ
.H\SDGDQGGLVSOD\
OD\RXW
Keypad 7KHNH\SDGLVXVHGWRVHWWKHƋRZPHWHU7KHIXQFWLRQRIWKHNH\VDUHDVIROORZV
T 2383.(< This key (hold 2 sec.) is used to switch between operator
menu and setup menu. In the transmitter setup menu, a short
press will cause a return to the previous menu.
FORWARD KEY This key is used to step forward through the menus. It is the
only key normally used by the operator.
BACKWARD KEY This key is used to step backward through the menus.
CHANGE KEY This key changes the settings or numerical values.
SELECT KEY 7KLVNH\VHOHFWVWKHƉJXUHVWREHFKDQJHG
L 2&.81/2&..(< This key allows the operator to change settings and gives
access to submenus.
Display
7KHGLVSOD\LVDOSKDQXPHULFDODQGLQGLFDWHVƋRZYDOXHVƋRZPHWHUVHWWLQJVDQGHUURUPHVVVDJHV
7KHXSSHUOLQHLVIRUSULPDU\ƋRZUHDGLQJVDQGZLOODOZD\VVKRZHLWKHUPDVVƋRZUDWHYROXPH
ƋRZUDWHGHQVLW\WHPSHUDWXUHWRWDOL]HURUWRWDOL]HU7KHOLQHLVGLYLGHGLQWRƉHOGV
S: 6LJQƉHOG
P: 3ULPDU\ƉHOGIRUQXPHULFDOYDOXH
8 8QLWƉHOG
The centre line is the title line (T) with individual information according to the selected operator
or setup menu.
The lowest line is the subtitle line (ST) which either will add information to the title line or keep
individual information independent of the title line.
F: The alarm field. Two flashing triangles will appear by a fault condition.
M: The mode field. The symbols indicate the following.
Communication mode Basic settings
Service mode Output
Operator menu External input
Product identity Sensor characteristic
Language mode Reset mode
Ready for change Access to submenu (Press )
Value locked RESET MODE: Zero setting of
WRWDOL]HUVDQGLQLWLDOL]DWLRQRIVHWWLQJ
/ 7KHORFNƉHOG,QGLFDWHVWKHIXQFWLRQRIWKHORFNNH\
&RPPLVVLRQLQJ