Siemens SINAMICS PCS, Руководство по эксплуатации

Страница: 26 / 28

Settings
5.2 PGU model parameters
SINAMICS PCS simulation model
24
Operating Instructions, 10/2020, A5E50173895A
Figure 5-2 Configuration of Simscape in MATLAB/Simulink®
5.2 PGU model parameters
The permanently set PGU model parameters are specified in the following chapter:
"Description of the default values, setting ranges and response (Page 12)".
The PGU model parameters that can be changed during the simulation are defined as input
variables, and can be found in Chapter "Model structure (Page 16)".
5.3 Comparison between the setting options for the simulation
model and the real PGU
Regarding the features implemented in the simulation model according to Chapter
"Description of the PGU and the features implemented in the simulation model (Page 11)",
the setting options available to users at the real PGU do not differ from the setting options of
the model according to Chapter "Description of the default values, setting ranges and
response (Page 12)".
5.4 Deactivating the simulation model
To deactivate the power generating unit model in a project, first select it using the right-hand
mouse key and then select "Comment out" in the shortcut menu.