Siemens SIMOTICS HV M, Руководство по эксплуатации

Страница: 93 / 136

Manufacturer Grease type
Addinol LM 3 EP
FAG Arcanol Multi 3
For motors of horizontal construction you can alternatively use greases with NLGI class 2.
However, this reduces the lubrication interval by 20%.
Table 9-3 Alternative greases with NLGI class 2 for motors of horizontal construction
Manufacturer Grease type
Shell Gadus S2 V100 2
ExxonMobil
Unirex N2
Esso
BP
Energrease LS2
Castrol Longtime PD2
Lubcon Turmogrease L 802 EP plus
Shell Retinax LX2
FAG Arcanol Multi 2
NOTICE
Diminished lubrication properties by mixing greases
The lubrication properties will be impaired if you mix different greases. This can result in
material damage.
● Avoid mixing greases. Only the manufacturer can provide a guarantee for the miscibility
of particular greases.
Lubrication data
Regreasing data are stated on the lubricant plate of the machine:
● Regreasing intervals in operating hours
● Regreasing amount in grams
● Grease type
Regrease the roller bearing at the latest every 12 months irrespective of the actual number of
operating hours.
NOTICE
Damage to roller bearings
The regreasing intervals for roller bearings are different from the servicing intervals for the
machine. The roller bearings may be damaged if the relubrication intervals are not adhered
to.
● Pay attention to the instructions on the lubricant plate.
Maintenance
9.1 Inspection and maintenance
SIMOTICS HV M 1RN76308PR900CG0-Z
Operating Instructions 07/2018
93