Siemens SIMATIC S7-CPs Скачать руководство пользователя страница 38

Страница: 38 / 60

8 Further Notes on Operation

−

CP 443-1 for Industrial Ethernet / Manual Part B

Release 07/2010

C79000-G8976-C223

−

No reaction to Autonegotiation query with manual configuration
Remember that if you configure the CP manually and the “Autonegotiation”

option is disabled, it will not react to an autonegotiation query! As a result, a

connected partner will not be able to set the required mode and communication

will not be ideal.
Example:

If, for example, the CP is set to “100 Mbps

−

full duplex” and autonegotiation is

disabled, a CP connected as partner will set “100 Mbps

−

half duplex”. Reason:

Due to the fixed setting, an autonegotiation reply is not possible. Although the

connected partner detects 100 Mbps with autosensing, it remains at half

duplex.

Recommendation: Change individual network settings only over MPI.
If you modify the LAN settings in the properties dialog of the CP in the “Options”

tab using the “Transmission medium/Duplex” list box, these changes will be

adopted by the CP and activated when the configuration data is downloaded to

the target system (STEP 7). In some situations, the device may then no longer

be obtainable over Ethernet.
We therefore recommend that you download configuration data to the S7

station over an MPI connection if you change this setting.
If you download the configuration data over the LAN interface, depending on

the selected setting, it is possible that the current download will not be

completed due to the changes to the configuration taking immediate effect and

an inconsistent configuration is reported.
Example:

The download is started initially with the setting TP/ITP at 10 Mbps half duplex.

If the “Individual network setting” is now changed to 100 Mbps full duplex, the

download cannot be completed.

8.3

PROFINET IO mode with IRT communication

8.3.1

Types of synchronization

Within an IRT domain (Isochronous Real Time), you can use the CP for IRT
communication.

You specify the required synchronization parameters in the properties dialog of the
ERTEC interface (HW Config: Row “X1 (<device name>)”) in the “Synchronization”
tab.

Содержание SIMATIC S7-CPs





























































Результаты поиска

Содержание SIMATIC S7-CPs

Отзывы:

Похожие инструкции для SIMATIC S7-CPs

Бренды по названию

Популярные бренды

Siemens SIMATIC S7-CPs, Руководство пользователя

Результаты поиска

Содержание SIMATIC S7-CPs

Отзывы:

Похожие инструкции для SIMATIC S7-CPs

Бренды по названию

Популярные бренды