manualshive.com logo in svg

Siemens SIMATIC S5-115F, Руководство пользователя


Поделиться
Скачать
background image

S5-115F Manual 

 Addressing

Programming the restart blocks

Load a two-byte bit pattern into ACCUM 1.

Transfer the information from ACCUM 1 to the module
(x=initial module address)

STL

Meaning

L

 KM

 a b

T

 PW

 x

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

The bits in the high-order byte

1

 (byte a in this example), which have been loaded into ACCUM 1

with the ”L KM a b” statement, correspond to the bit addresses of the eight input channels. If a bit
is set to ”1”, the interrupt is enabled for this channel.
The bits in the low-order byte

1

 indicate whether the interrupt on this channel is triggered by a

rising edge (”0”) or by a falling edge (”1”) .

Note

•

In the case of the S5-115F, interrupts may only be configured with falling edge.
All interrupts used must be enabled. 

•

Initialization may only be implemented in OBs 21 and 22.

•

The interrupt register must be scanned in OB 2.

5.5.3

Access

Status processing

Unlike the interrupt register, a status scan may also be programmed in OB 1.
The signal states should be loaded into the PII before further processing as the status byte is not
written cyclically to the PII.

OB 1:

Meaning

STL

L

 PY

x

T

 IB

x

A

I

x.y

Load I/O byte ”x”.

Transfer loaded I/O byte to the PII
(x=Initial module address)

Evaluate inputs  (y=Bit address).

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

1

  

The high-order byte is the even byte (e.g. 2) and the low-order byte the odd byte (e.g. 3)

EWA 4NEB 811 6148-02

5-13

Содержание SIMATIC S5-115F






































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC S5-115F

Gardena 4040 Operating Instructions Manual preview
4040
Бренд: Gardena Страницы: 100
IBM 1710 Manual preview
1710
Бренд: IBM Страницы: 72
Lattice Semiconductor MachXO5-NX Development Kit Quick Start preview
MachXO5-NX Development Kit
Бренд: Lattice Semiconductor Страницы: 2
Panamax M4000-PRO Instructions Manual preview
M4000-PRO
Бренд: Panamax Страницы: 16
IN-COMMAND NCSP35CM Installation And Operation Manual preview
NCSP35CM
Бренд: IN-COMMAND Страницы: 47
SYCLOPE TRACE'O Manual preview
TRACE'O
Бренд: SYCLOPE Страницы: 60
GHL ION Director Instruction Manual preview
ION Director
Бренд: GHL Страницы: 34
RAKwireless WisLink LPWAN RAK5146 User Manual preview
WisLink LPWAN RAK5146
Бренд: RAKwireless Страницы: 9
NOCO Genius CURTIS DC Series Installation Instruction preview
CURTIS DC Series
Бренд: NOCO Genius Страницы: 2
TimeTec Security TimeTec BLE-2 Installation Manual preview
TimeTec BLE-2
Бренд: TimeTec Security Страницы: 2
Xylem Aquavar AB2 Quick Start Manual preview
Aquavar AB2
Бренд: Xylem Страницы: 2
EuroLite Ambience Control 1 User Manual preview
Ambience Control 1
Бренд: EuroLite Страницы: 20
SKF Matrix MAX1 Installation, Operation And Maintenance Manual preview
Matrix MAX1
Бренд: SKF Страницы: 88
DS Produkte AN-A326 Instructions preview
AN-A326
Бренд: DS Produkte Страницы: 4
GEM 673P9 Series Installation, Operating And Maintenance Instructions preview
673P9 Series
Бренд: GEM Страницы: 56
Lunt Solar Systems LS100THa/DSII Manual preview
LS100THa/DSII
Бренд: Lunt Solar Systems Страницы: 4
CALEFFI 677 Series Manual preview
677 Series
Бренд: CALEFFI Страницы: 10
Watlow EZ-ZONE PM L AAAAB Series User Manual preview
EZ-ZONE PM L AAAAB Series
Бренд: Watlow Страницы: 30

Бренды по названию

Популярные бренды

Загрузить еще бренды