manualshive.com logo in svg

Siemens SIMATIC S5-100U, Системное руководство, Страница: 81 / 552

Поделиться
Скачать
Siemens SIMATIC S5-100U Скачать руководство пользователя страница 81

S5-100U 

 Start-up and Program Tests

4.4

Backing Up the Program

A program can be backed up only if the back-up battery is connected. Backing up copies a program
from the program memory of the CPU to a memory submodule. Only valid blocks are backed up.
As soon as you have changed the integral, default DB1 data block, it is a valid block that can be
backed up. See section 7.5.2.

4.4.1

Backing Up the Program on a Memory Submodule

You can use various EEPROM memory submodules to back up a program.  Appendix D contains a
list of the submodules you may use.  Figure 4-4 illustrates how to back up a program on a memory
submodule.   

Figure 4-4.  Procedure for Backing Up the Program on a Memory Submodule

Yes

Plug

 

EEPROM sub-

module into the CPU.

Turn off  the S5-100U.

Program is

loaded.  

1)

Red LED flickers;

Release <COPY>

Press <COPY> key

for at least 3 s.

Insert / replace

battery.

Battery low LED (yellow)

lights.

Red LED flashes.

Red LED

flashes.

Red LED

lights.

Error

Red LED lights;

Program backed  up

on EEPROM

submodule.

 The CPU is in the

Normal Mode.

Perform error

diagnostics

(see section 5.1).

Release <COPY>

key.

Turn on the S5-100U.

No

-  No / wrong sub-

module plugged
in.

- No program is in

the  S5-100U.

1)

  Program load time:    40 s/1024 statements

EWA 4NEB 812 6120-02b

4-7

Содержание SIMATIC S5-100U









































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов