manualshive.com logo in svg

Siemens SIMATIC S5-100U, Системное руководство


Поделиться
Скачать
background image

S5-100U 

 Introduction to STEP 5

Programming Data Blocks

Begin programming a data block by specifying a block number between 2 and 63 for CPU 100 or
CPU 102, and between 2 and 255 for CPU 103.  DB0 is reserved for the operating system, DB1 for
setting parameters for internal functions (see section 9.1).  Data is stored in this block in words.

If the information takes up less than 16 bits, the high-order bits are padded with zeros.  Data input
begins at data word 0 and continues in ascending order.  A data block can hold up to 256 data
words.  You can call up or change the data word contents with load or transfer operations.

Input

Stored Values

0000    :     KH

=

A13C

DW0

A13C

0001    :     KT

=

100.2

DW1

2100

0003    :     KF

=

+21874

DW2

5572

                 

      

Figure 7-7.   Example of Data Block Contents 

You can also create or delete data blocks in the control program (see section 8.1.8).

Program Processing with Data Blocks

•

A data block must be called in the program with the C DBx operation (x = DB number) before it
can be accessed.

•

Within a block, a data block remains valid until another data block is called.

•

When the program jumps back into the higher-level block, the data block that was valid before
the block call is again valid.

•

After OB1, 2, 13, 21, 22 have been called by the operating system, no DB is valid.

Figure 7-8.   Validity Areas of Data Blocks

C  DB10

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

When PB20 is called, the valid data area is entered into memory.
When the program jumps back, this area is reopened.

Valid 

DB

PB7

DB10

JU PB20

DB10

PB20

Valid 

DB

DB10

C  DB11

DB11

The Function of DB1

DB1 is used for special functions.  DB1 is already integrated into CPU 103 version 8MA03 and
higher and contains (default) values that you can either accept or change (see section 9.1).  DB1 is
evaluated once during start-up: either after Power ON or after a transition from STOP to RUN.

EWA 4NEB 812 6120-02b

7-17

Содержание SIMATIC S5-100U









































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC S5-100U

ABB ACS850-04 series Firmware Manual preview
ACS850-04 series
Бренд: ABB Страницы: 296
ABB 650 series Applications Manual preview
650 series
Бренд: ABB Страницы: 320
ABB ACS880 Series Supplement Manual preview
ACS880 Series
Бренд: ABB Страницы: 50
ABB COM600 series Operator'S Manual preview
COM600 series
Бренд: ABB Страницы: 56
Canon imageRUNNER ADVANCE C9075S PRO User Manual preview
imageRUNNER ADVANCE C9075S PRO
Бренд: Canon Страницы: 20
Cansec H1000 Installation Manual And Instructions For Use preview
H1000
Бренд: Cansec Страницы: 45
Cansec CP40 Installation Manual preview
CP40
Бренд: Cansec Страницы: 43
Cansec MAP2 Installation Manual preview
MAP2
Бренд: Cansec Страницы: 32
National Instruments RMC-8354 User Manual preview
RMC-8354
Бренд: National Instruments Страницы: 102
NAU ROBOTICS RC40A Operating Instruction preview
RC40A
Бренд: NAU ROBOTICS Страницы: 109
Native Instruments Maschine Mikro MK2 Getting Started preview
Maschine Mikro MK2
Бренд: Native Instruments Страницы: 181
Radware Alteon Installation And Maintenance Manual preview
Alteon
Бренд: Radware Страницы: 98
RabbitCore RCM2200 Getting Started Manual preview
RCM2200
Бренд: RabbitCore Страницы: 34
R82 High-low Mounting Instruction preview
High-low
Бренд: R82 Страницы: 11
Vaillant VRC 470 Installation Instructions Manual preview
VRC 470
Бренд: Vaillant Страницы: 52
Vaillant VSMART User Manual preview
VSMART
Бренд: Vaillant Страницы: 11
DigiPower IPP-S Series Installation Manual preview
IPP-S Series
Бренд: DigiPower Страницы: 27
National Instruments SCC-DO01 User Manual preview
SCC-DO01
Бренд: National Instruments Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды