Siemens SIMATIC RTLS Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 204

Siemens SIMATIC RTLS Скачать руководство пользователя страница 39

Installation with support - Corner installation

Follow the steps below to mount the device to a corner:
1. Use the corner support as template and draw the bore holes on the corner.
2. Drill the holes with a suitable device.
3. Insert the matching anchors in the holes. (Anchors are not supplied with the device.)
4. Mount the corner support to the corner.
5. Mount the device to the corner support using the screws (M4). (Screws are not supplied with

the device.)

Installation with support - Mast mounting

Follow the steps below to mount the device to a mast:
1. Use the mast mount as template and draw the bore holes on the mast.
2. Drill the holes with a suitable device.
3. Insert the matching anchors in the holes. (Anchors are not supplied with the device.)
4. Install the mast mount to the mast.
5. Install the device to the mast mount using the screws (M4). (Screws are not supplied with

the device.)

Note
If drilling is not possible, you can also fasten the mast mount to the mast with cable ties, for

example.

5.2.2.3

Operation

The device is not suitable for operation in hazardous areas.
Operation of the system to EN 60950-1 is only safe when the housing cover is installed (cooling,

fire protection, interference suppression).
In case of emergencies (e.g. when the enclosure is damaged, when liquids or foreign objects

are entering the device), the device must be disconnected from the power supply and

maintenance must be contacted immediately.
An anchor is ready for operation when the upper green LED lights up permanently. The other

two LEDs play no role in operational readiness.

5.2.2.4

Cleaning and maintenance

The device may only be opened by suitably trained and qualified personnel. Only authorized

dealers are permitted to repair the device.
Unauthorized opening of and improper repairs to the device may cause substantial risks to the

user. As soon as the device was opened without permission, warranty and liability of the

Siemens AG are rendered null and void.

Anchors

5.2 SIMATIC RTLS4330A

System Manual, 04/2019, C79000-G8976-C577-01

39

«
...
37
38
39
40
41
...
»

Содержание SIMATIC RTLS













































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды