Siemens SIMATIC PG 720, Руководство пользователя

Страница: 100 / 110

Glossary-4
PG 720 Programming Device
C79000-G7076-C720-02
The flat monitor of the PG 720.
Pressing and releasing the left mouse button very quickly twice in succession
without moving the mouse. This action is normally to open an object or
program.
The PG 720 programming devices are usually equipped with one hard disk
drive and one diskette drive.
These are programs which are part of the operating system. They adapt the
data from user programs to the specific formats required by the I/O devices
such as hard disk, printers and monitors.
In graphics-supported programs, a menu line is positioned on the top edge of
the screen. The menu titles contained in this line can be set either as
drop-down or pull-down menus. Drop-down menus “roll” down as soon as
the mouse pointer passes over a menu title. Pull-down menus only “roll”
down when the menu title is clicked on. Different functions can then be
called from these menus by moving the mouse and clicking on an item in a
menu.
These are plug-in submodules with EPROM/EEPROM chips. S5 user
programs can be stored on them. These programmed submodules are then
plugged in specially designed receptacles in the programmable controller.
A memory extension can be installed in a programming device to increase
the size of the memory.
Display
Double-Click
Drives
Drivers
Drop-Down Menu
E
EPROM/
EEPROM
Submodules
Extended Memory
Glossary